ORGONE ENERGY PYRAMID'S / Avoid Costly Mistakes! 1 of 2

Share
Embed

Comments • 277

  • celestialruby888
    celestialruby888 8 hours ago

    Were those magnets in the base stand ?

    • X- Tremevidpro
      X- Tremevidpro  17 minutes ago

      Copper Wire Heavy Gauge. Thanks for watching. 😃

  • G Ca
    G Ca 5 days ago +2

    It's very pretty

    • X- Tremevidpro
      X- Tremevidpro  5 days ago

      Thank you! There are several to view. Lighting effects as well. Thanks for watching! 😃

  • Heather Bostian
    Heather Bostian 7 days ago

    too bad poor camera can;t see most of this .

    • X- Tremevidpro
      X- Tremevidpro  7 days ago

      Heather: You seriously need Glasses! $1,200 Movie Camera you mouron. Made in 2008 at that time finest Video Camera made. Hard Drive 60GB. Sorry your eyes are bad! Glad you enjoyed the music!

  • dana turner
    dana turner 9 days ago +1

    So cool

  • cornejoronron
    cornejoronron 10 days ago

    What is the name of the resin used to make these pyramids sir please post it thank you great work thanks for sharing it's absolutely beautiful

    • X- Tremevidpro
      X- Tremevidpro  10 days ago

      Clear Polyester Resin. Take your time and be patient when Stirring with Popsicle stick. Slowly or u get bubbles. Must be careful not to add to many drops of Liquid Hardner. If you piece gets hot due to chemical reaction. Your piece of work will crack. What kind of Mold are you using?

  • Rafael Nogueira Sponfeldner

    Owesome job, thanks.

  • Sabine Wohlwend
    Sabine Wohlwend Month ago

  • Jake Bartlett
    Jake Bartlett Month ago

    Doesn't the metal/resin mix have to be 50/50? I'm sure it does...

    • Jake Bartlett
      Jake Bartlett Month ago

      +X- Tremevidpro why do you also powdered metals since you're here? Namaste.

    • Jake Bartlett
      Jake Bartlett Month ago

      +X- Tremevidpro alright mate chill out I didn't say anything ?😂😂😂

    • X- Tremevidpro
      X- Tremevidpro  Month ago

      No it does not have to be 50/50 mixture! Use Gold as an amplifer of energy. I already explained that to you! Get an Orgone, you could use one...get it?

    • X- Tremevidpro
      X- Tremevidpro  Month ago +1

      Have a nice weekend! 😃

    • X- Tremevidpro
      X- Tremevidpro  Month ago +1

      Not unnecessarily because I use Gold as an amplifier of energy. An ample amount of shavings is fine. I use Gold so you can get a better view of what is inside. Thanks for watching.

  • Doogy Dog
    Doogy Dog Month ago

    R u serious, just what do you think people are learning here?

    • Doogy Dog
      Doogy Dog Month ago

      +X- Tremevidpro It is suppose to be a tutorial correct? Seems as if you are just showcasing your work, not explaining the process. Just a stupid observation.

    • X- Tremevidpro
      X- Tremevidpro  Month ago

      RU Serious? I can think of
      a 130,000 reasons! When one limits ones thoughts, stupidity is noted. I 💘 stupidity, so take your remarks elsewhere.

  • Tatyana Chambers
    Tatyana Chambers Month ago

    how do you mix resin and don't get air bubbles?

    • Tatyana Chambers
      Tatyana Chambers Month ago

      thank you!

    • X- Tremevidpro
      X- Tremevidpro  Month ago

      Two ways to get rid og bubbles. Use a popsicle stick and stir slowly. Any left over bubbles blow lightly through a straw and chase the bubbles to the sides and they will pop. Thanks for watching...😃

  • TheWilson565
    TheWilson565 Month ago

    I have No idea what you are doing. It goes so fast, and there is No audio. Try it again. Go slower, and give some sort of explanation. Tell us what is going on, or something. This sucks.

  • Wes Caron
    Wes Caron 2 months ago

    at 9:00 it looks like a beautiful crowned lion, or a cheetah

    • X- Tremevidpro
      X- Tremevidpro  2 months ago +1

      Never noticed that before! Thanks for watching...more to come.

  • X- Tremevidpro
    X- Tremevidpro  2 months ago

    I have sold them, but the time and cost just doesn't make it worth while. So I have them all around. A peaceful feeling in my Townhome. No stress at all! Thanks for watching. If you decide to meke one, plan on spending approx. $500.00. That was my cost...😃

  • Olli Garch
    Olli Garch 2 months ago

    Do you sell any of these they are beautiful and I work 70 to 80 hours a week so my time is short to make my own. I am going to attempt when my work slows s bit.

  • Gladys
    Gladys 2 months ago

    Beautifully artistic! Great tips with the coiling! I can hardly wait to start making them! I've pounds and pounds of crystal I've been digging from the Arkansas veins since the 1980's, giving them away, making clay art, and wondering what I can do to really make a difference with them. I just discovered orgonite and the lights came on. My crystals began calling me again!

  • Amanda Ross
    Amanda Ross 2 months ago

    what are those little shaving you put in there

    • X- Tremevidpro
      X- Tremevidpro  2 months ago

      Brass shaving from Brass Keys. You will also see Gold. That is used to amplify the energy. Ebay. search for Gold Leafs and you will find Gold thin squares that are pure and are not expensive. They work with the Brass. Thanks for watching.

  • Darnella Wilson
    Darnella Wilson 2 months ago +1

    2 cool. should sell them. I like the eye and the lions head.

    • X- Tremevidpro
      X- Tremevidpro  2 months ago

      +Darnella Wilson Cost est. $500.00 build 1st. one after the mistakes that come with it! Alot tougher than it looks...

    • Darnella Wilson
      Darnella Wilson 2 months ago

      I bet. very nice though.

    • X- Tremevidpro
      X- Tremevidpro  2 months ago +2

      Thanks for the compliment! They are a lot of work. Too much time invested and cost is very expensive! Thanks for watching! 👍

  • X- Tremevidpro
    X- Tremevidpro  2 months ago

    Dude most all have Amethyst in them. The pieces are much smaller. Look closely and you can see.

  • Sara Naidu
    Sara Naidu 2 months ago

    Do you sell them?

  • anton bacon
    anton bacon 2 months ago

    For some reason a lot of orgon videos have been popping up on my feed. I think a lot of thies paramides are realy nice works of art. A lot of people that are getting in to this are Christian and for thoes of you that are putting your intentions payr and belivef in to a composite object this is a form of idolatry. Trust in Christ Jesus . He is the liveling water the truth the way the light.

    • Rusty Chuckles
      Rusty Chuckles 2 months ago

      My extensive study, prayer, ministry, and experience with Christianity has shown me several things. 1 - Christianity is a savior meme, designed to keep people from rising up against the Jesuits and the Vatican. 2 - Any church you go to that has a cross in it is directly in violation of the commandment that tells us not to worship idols... I think that praying to the cross is in fact the most blatant idolatry I have seen and the fact that you call Orgonite idolatry while not addressing the big white Elephant known as the crucifix in the room shows me that you are looking at the splinter in your brother's eye while ignoring the log in yours. That's my 2 cents Anton, spend it how you want

    • X- Tremevidpro
      X- Tremevidpro  2 months ago

      Anton Bacon; Orgone Energy is it's own enity. Has nothing to do with Christ. I agree with you totally. What about all that electrical current flowing through your body as you are watching tv? EMF's causes Cancer. Electrical Magnetic Field. Orgone actually protects your body from the Ions that are being released from the Orgone. ✔ out Whilhelm Reich as he is the Inventor. Thanks for watching. 😃

  • Johannes Victor Brormand Thomassen

    no Bismuth ?

  • Linda White
    Linda White 2 months ago

    Video not enjoyable at all. Speed was too fast to even be able to figure out what he was doing. Couldn't determine what products he was using most of the time. No information given about products. Sound went out 1/2 way through. It's really too bad because I loved the end product.

    • X- Tremevidpro
      X- Tremevidpro  2 months ago

      You are the first in a 125,000 people that has this problem. You should try an Orgone Pyramid to speed your brain up! Don't take it personal! Thanks for watching!

    • X- Tremevidpro
      X- Tremevidpro  2 months ago

      Too long and people go elsewhere! People are to impatient as you know! If u want to sit and watch a video for an hour and a half? 😢

  • Linda White
    Linda White 2 months ago +3

    I found this video pretty much useless!! Couldn't see how he coiled his wire because it was too fast and he didn't have the camera where you could see what his hands and fingers were doing. Couldn't find out what most of the items were, video going to fast. It would have been great if you just did a regular talking and instruction video. I did like the end result though.

    • X- Tremevidpro
      X- Tremevidpro  18 days ago +1

      Linda, I should delete your senseless comment, instead I will let others observe your ignorance.
      Glad you enjoyed the 📹! S✌🙏.

    • X- Tremevidpro
      X- Tremevidpro  2 months ago

      Well then I can slow it down and make you a 4 hour video instead. Most prefer the faster version. Thanks for watching! 😃

  • Frame Your Life With Nykohl

    Are these for sale? I'd purchase many from you if they are!

    • X- Tremevidpro
      X- Tremevidpro  2 months ago

      I do have only a few that Inwould part with. They are expensive to make because I use top quality materials. Not to mention all have Gold in them used to amplifie the energy. If you were to make one it would cost you approx. $500.00 believe it or not. Range fron $250.00 and up depending on which one. I could forward a couple photos if you would like. Thanks! 😃

  • LoveGlitters AroundYou
    LoveGlitters AroundYou 2 months ago

    Its so pretty i cant believe its good for you too

    • Sea Spray
      Sea Spray Month ago

      I've just read that you make pendants too - can we see them as well too please?

    • X- Tremevidpro
      X- Tremevidpro  2 months ago

      Look up the life of Whilhelm Reich and you will be truly amazed at his discovery. The government came to his property and destroyed all information on Orgone Energy. Not even his wife knew how he did it!

    • X- Tremevidpro
      X- Tremevidpro  2 months ago

      You can feel an energy source in a room. Relaxing and sleep like never before. I always carry a Pocket Orgone in my pocket. A sense of security. I love them all! Thanks for watching!

  • LoveGlitters AroundYou
    LoveGlitters AroundYou 2 months ago +1

    A reptilian woman said we will find out how important copper is. Now i see why

  • LoveGlitters AroundYou
    LoveGlitters AroundYou 2 months ago

    Tesla coils

    • X- Tremevidpro
      X- Tremevidpro  2 months ago

      You guessed it! When you are in your home you are surrounded by copper wire with electrical current. That current will transmit right through the human body and that has been known to cause many Cancers. Orgone Pyramids made properly will actually stop the current fron going through the body. Thanks for watching.

  • PeterKazama
    PeterKazama 2 months ago

    s3.amazonaws.com/flatearth/index.html

    • PeterKazama
      PeterKazama 2 months ago

      you may also need to update your browser..as it may not support 3d...but its worth.

    • PeterKazama
      PeterKazama 2 months ago

      pc or mac browser(chrome/ firefox/ie)..not for mobile

    • X- Tremevidpro
      X- Tremevidpro  2 months ago

      Will not open

    • X- Tremevidpro
      X- Tremevidpro  2 months ago

      That sight will not open.

  • Rich Bones
    Rich Bones 3 months ago +10

    I've been watching more and more videos doing my homework before I try my hand at making any. I can't wait!

    • Olli Garch
      Olli Garch 2 months ago

      Rich Bones me too.

    • X- Tremevidpro
      X- Tremevidpro  2 months ago

      Good Luck!

    • X- Tremevidpro
      X- Tremevidpro  3 months ago +1

      TIP: Do Not use Epoxy as it never completely dries as it will yellow on you. Use the resin shown in the video. $40.00 per container. When you make your pours in layers. Too thick of pour and the resin will get HOT and your New Orgone will Crack. Be certain to mix it well removing all bubbles. Pull bubbles to side wall and they will burst. The fumes are extremely strong. Ventilation is a must! Watch other videos for tips. Use Gold to amplify the Energy being released.
      Do Not buy Mold Release in the clear bottle as your Orgone will be destroyed trying to get it out! I use a very thin layer of Auto Wax and it will pop right out. Good Luck! You'll get better over time! Thanks for watching. By all means do homework first!

  • Nolberto Cales
    Nolberto Cales 3 months ago +3

    Dude, the best Orgone Pyramids are made of Amethyst Crystals, you can feel the energy in you're hands when holding them!

    • Ruvim Bejan
      Ruvim Bejan 2 months ago

      Some research behind it says it calls upon the evil spirits... don’t be deceived for the devil Will mask all his products

    • X- Tremevidpro
      X- Tremevidpro  3 months ago

      Purchase an Orgone "Ion" reader. Approx. $100.00. That will register the energy release!

    • X- Tremevidpro
      X- Tremevidpro  3 months ago +2

      My name is Steve, not dude! Thanks...😃

    • Nolberto Cales
      Nolberto Cales 3 months ago +1

      X- Tremevidpro Thanks!

    • X- Tremevidpro
      X- Tremevidpro  3 months ago +2

      I also use Gold as an amplifier of energy. Many semi precious stones and crystals from all over the world. I love them all. Thanks for watching.

  • Mr.Moon2you
    Mr.Moon2you 3 months ago

    What happens if I copper wrap a geode unbroken, I mean it has crystals inside and it's a million old natural geode....., Would performance increase?
    Yes I'm very new to this !

    • X- Tremevidpro
      X- Tremevidpro  3 months ago

      Not a problem at all. Just be sure your liquid pours are layered with such materials shown in many of my other Orgone Videos. They are very educational. Grab a cup of ☕ and watch. Follow my steps.

  • Mr.Moon2you
    Mr.Moon2you 3 months ago

    any good websites or ppl of interest ???
    Just starting from scratch , I want to learn more of this art before building any
    Thanks

    • Mr.Moon2you
      Mr.Moon2you 3 months ago

      +X- Tremevidpro thanks alot , im looking into this deeply. I would like to know what each item brings to each individual one I make. I don't want to randomly throw rocks together. I heard of the brass and gold , I work in machining so the metal shavings are easy to come by, and copper fillings.
      Mostly using these for EMF, and better vibes in this apartment building I'm living in.
      So I'd like to know where to start with these options

    • X- Tremevidpro
      X- Tremevidpro  3 months ago +1

      Check out the 120,000 Viewed Orgones I made and that Video will also help you out as well.

    • X- Tremevidpro
      X- Tremevidpro  3 months ago +1

      MrMoon2you ....My first Orgone Pyramid cost me alot. The learning process is a battle because you have to have Silicone Molds work best. Do not use Epoxy Cheaper but will yellow in a short time.
      The liquid pour you see is also a battle. The fumes are extremely powerful. $40.00 One container. 3 Orgones. Pour in layers. If not mixed properly, cracks or soft spots will appear and pieces of your Orgone will land on the floor. My first Orgone Pyramid would not release. Destroyed my Orgone. Everyone seems to have their own opinion on left coils and right. You could end up spending $500.00 for you 1st. Pyramid. Need to have all sorts of Brass shavings, silver and different stones do different things. Stress, Love, EMF and so much more. All I can say is good luck! Thanks for watching.
      Don't forget Gold, as that is used in the Orgone to amplify the energy (IONS) released! I've created over 50 pyramids. 60 Pendents. There is a young lady that places flowers in her pendants and does a excellent job. She can also answer many questions. She is easy to locate. Very sweet young lady.

    • X- Tremevidpro
      X- Tremevidpro  3 months ago

      MrMoon2you ....My first Orgone Pyramid cost me alot. The learning process is a battle because you have to have Silicone Molds work best. Do not use Epoxy Cheaper but will yellow in a short time.
      The liquid pour you see is also a battle. The fumes are extremely powerful. $40.00 One container. 3 Orgones. Pour in layers. If not mixed properly, cracks or soft spots will appear and pieces of your Orgone will land on the floor. My first Orgone Pyramid would not release. Destroyed my Orgone. Everyone seems to have their own opinion on left coils and right. You could end up spending $500.00 for you 1st. Pyramid. Need to have all sorts of Brass shavings, silver and different stones do different things. Stress, Love, EMF and so much more. All I can say is good luck! Thanks for watching.
      Don't forget Gold, as that is used in the Orgone to amplify the energy (IONS) released! I've created over 50 pyramids. 60 Pendents. There is a young lady that places flowers in her pendants and does a excellent job. She can also answer many questions. She is easy to locate. Very sweet young lady.

  • Dawn R
    Dawn R 3 months ago

    Caution!!! make sure your coil is wrapped clockwise. tvclip.biz/video/uCg64JCm_pc/video.html

  • Jessica Neubauer
    Jessica Neubauer 4 months ago

    What do you use for the stuff you pour? Is it acrylic?

    • Jessica Neubauer
      Jessica Neubauer 4 months ago

      X- Tremevidpro thank you! I just wanted to know what the clear stuff is. Im not making pyramids just tower buster type things but wanted to make some that look nicer than with resin for inside.

    • X- Tremevidpro
      X- Tremevidpro  4 months ago

      Jessica Neubauer Polyester Resin & it's mistakes along the way. Like air bubbles. Not mixed properly. Resin heats up and cracks on you. Cost is $40.00 for the first 2 pours. I finally had to stop at 55 pyramids. Good luck! Thanks for watching.

  • Maria Wallace
    Maria Wallace 5 months ago

    An explanation of what you are doing and what metals ect would be really good.

    • Maria Wallace
      Maria Wallace 5 months ago

      X- Tremevidpro you thanks for replying
      Admittedly I haven't watched the entire video, as a newbie to the Organite thing I want to learn what's n them and maybe how to make them so hence my previous comment. Maybe you could make a new video highlights ingredients ect.

    • X- Tremevidpro
      X- Tremevidpro  5 months ago

      Maria Wallace Gold is important as it is used to intensify the energy being released out of the Copper Coils known as IONS! Alot of research did help somewhat; then again you can't always believe some people are correct. I go from experience and loan mine out. Always get the #1 solution. They ALL had the best night sleep in a long time. Alot of time and effort. Then again; An idle mind; is a Devils workshop! Thanks for watching...

  • Peace Chosen
    Peace Chosen 5 months ago

    Do you sell Orgone pyramids?

  • Lone wolf productions
    Lone wolf productions 5 months ago +2

    you know the Turkish eye that you used ..if you place that flat so the eye is facing upward on the top of the pyramid when set it looks all around . it's a really cool effect

    • Lone wolf productions
      Lone wolf productions 5 months ago +1

      it creates an optical illusion so it's looking up but also on all sides chinese coins work well too on the base when placed in the center of the base on a slight angle the coins flip depending on which side your viewing. i've just set up all my kit outside to start making some right now ..have a nice day

    • X- Tremevidpro
      X- Tremevidpro  5 months ago

      Lone wolf productions I never gave that much thought; moving forward to newer projects. I don't stay on one project too long, much more to explore! Thanks for watching...

  • jee sukset
    jee sukset 8 months ago

    Does it matter if you buy your orgonite or do it yourself?

  • KillaCommieFerMommie
    KillaCommieFerMommie 8 months ago

    So where do you get those clear resin squares you're using for the outside walls of the pyramid?... I can't find them on eBay.... I've made orgones in a mold before, but never get the professional look, because the stones and copper shavings always go right to the edge.

    • X- Tremevidpro
      X- Tremevidpro  8 months ago

      Practice makes perfect. First few I made were completely destroyed. You can also purchase cool Silicone Molds on Ebay very reasonable. They also will require a fine film of Auto Wax to prevent your mold from sticking to the sides. If you pour to quickly, your Orgone will heat up chemicaly and WILL have a few cracks in it. Have fun and open the windows. Fumes are bad!

    • X- Tremevidpro
      X- Tremevidpro  8 months ago

      KillaCommieFerMommie Home Depot or Lowes in tile section. You want the ceramic ones and as smooth as glass. Are different styles and types. Use clear silicone bead down the edge like I did in video. Be sure before you pour, that you use a fine auto wax and lightly coat the tile and you Orgone will almost fall out. Those 4" tiles are about $2.00 ea. Thanks for watching. You are using Polyester Resin not Epoxy it will yellow and it will never completely harden.

  • Mishka Schovloski
    Mishka Schovloski 10 months ago

    DUDE! WTF ARE U DOING?USING WHAAAT??? U SHOULD TALK AND SLOW DOWN!!!

  • Arch L Croft
    Arch L Croft 11 months ago

    I cannot see what you are doing

  • John
    John Year ago +4

    This is such a fun hobby. I scammed 10 people yesterday for over $300 making my own organit. Tomorrow I plan on scamming my friends an family

    • Rusty Chuckles
      Rusty Chuckles 2 months ago +1

      Sarcasm is rarely funny and usually used by people who are uncomfortable with themselves and are using it as a way to project or deflect their own negative feelings / self loathing. I hope that your spiritual sickness goes away John, I truly do. I know that you don't truly enjoy making sarcastic mean spirited comments on videos made by people who are trying to help the world. I will pray to Creator, Originator, Mother, and Father for you to look inwards and work on yourself, so that you may find happiness one day as well.

    • X- Tremevidpro
      X- Tremevidpro  2 months ago +2

      +lkjyuiop That guy can't even spell the word Orgonite! He should have stayed in school just a few more years.

    • X- Tremevidpro
      X- Tremevidpro  2 months ago +4

      Well John, good for you! I'm really pleased that you scammed those people. First you need to learn how to spell Orgonite, the we might believe your scamming story. You should have stayed in school. Dropping out didn't help at all! Thanks for watching Johnny!

    • JenCataldi
      JenCataldi 2 months ago +3

      +lkjyuiop I'm pretty sure John's a troll...

    • lkjyuiop
      lkjyuiop 4 months ago +11

      John well if your intentions are to scam people what comes around goes around and back to you X 10

  • Regina Peterson
    Regina Peterson Year ago

    Pretty awesome except that pyramids have to be the same in height as the sides or it isn't a true pyramid. I thought yours looked a little short and wide. I could be mistaken. Maybe it just looks that way in the video.

  • Average Joe
    Average Joe Year ago +1

    Nice bullshit!

    • Z FORCE 1
      Z FORCE 1 3 months ago

      Average Joe

    • lkjyuiop
      lkjyuiop 4 months ago +1

      Average Joe you don’t even know what it is dumb ass

    • Mayisha King
      Mayisha King 4 months ago +1

      Average Joe why watch it?

  • paulalbertdieter
    paulalbertdieter Year ago +2

    Your pyramids look very beautiful. Like a good piece of art. But they are not orgonites. Because they dont seem to have the right proportions of 50%organic and 50%anorganic. So they wont work .

    • Rachel Monahan
      Rachel Monahan 3 days ago

      +Cole Peltier what's the water test?

    • X- Tremevidpro
      X- Tremevidpro  5 months ago

      paulalbertdieter You have Organic and Non-Organic orgonite materials. Why do people put Gold in the Pyramids? Simple answer?

    • Cole Peltier
      Cole Peltier 5 months ago

      Im willing to bet money those wont pass the water test but either way I think they look awesome and wouldnt mind having one

    • X- Tremevidpro
      X- Tremevidpro  8 months ago +1

      paulalbertdieter Be it as you may! Afterall everyone has their own opinion. That is your opinion...I will leave it at that. Thanks for watching. I love them all!!!

  • Soviet II
    Soviet II Year ago

    Well, this video was nice to watch but explained almost nothing regarding these mistakes you were going to show us how to prevent. It is totally unclear with many points wt heck you are even doing - what did you do to the copper rods with the hammer, what metals you were adding at each phase, how long between layers, and most of all...rock tumbling your own stones? That alone is an art that takes many years to perfect, you must always match stone hardnesses, a mix of large medium and small stones, the weeks it takes between each tumble, all the step of different grind powders etc etc etc....sorry, I learned nothing from this at all.

  • Moldavite Angel
    Moldavite Angel Year ago

    Lovely gift you have been given...beautiful x

  • kjbrocky
    kjbrocky Year ago +1

    Very nice work. Do you sell these?

    • lkjyuiop
      lkjyuiop 4 months ago

      kjbrocky can’t you see they just showed you in fast speed how to make ur own ahhhhh

  • OldAccount PendingDelete

    where do you buy your stones for tumbling or do you find them. i can never find the ones like the pretty blue ones

  • evene steven
    evene steven Year ago

    Needs more metal shavings in the resin to call it an orgonite (50/50 proportion ideally). Only a small bit of quartz needed for a simple piece.

  • kevin owen
    kevin owen Year ago

    told everything but what to put in when ????

    • X- Tremevidpro
      X- Tremevidpro  Year ago

      kevin owen That would take several videos to explain in detail. My other
      "Orgone Videos explain that. Not all stones are the same. There are several layers of Copper, Gold, Silver and Copper Coils for the release of " Ions". If you were to build one, you can expect to spend approx. $500.00 by the time you needed all supplies. Thanks for watching!

  • sungleong
    sungleong Year ago

    so the proportion of metal and resin should be roughly 50/50, and I can add as many quartz crystals as I want, right?

  • njwillette
    njwillette Year ago

    These things look demonic as fuk.

  • joia b
    joia b Year ago

    So inspiring thank you! I'm intimidated to make one & your video breaks down the steps. Much appreciated- new subscriber! 💗🙏🏼🌸

  • Desi Simm
    Desi Simm Year ago

    What do you charge for a set?

  • Mr. Universe
    Mr. Universe Year ago

    please explain the argument of counterclockwise spiral copper?

  • MysticMess✧99ნ
    MysticMess✧99ნ Year ago +12

    Just my 2¢: I found that using Unrefined, Raw Coconut oil 〔ORGONic〕 works best as a mold release. 🙂 I do LOVE your work however... if only a bit slower & with BACH playing in the background well, 💥AMAZING!!💥 (my humble opinion.x)
    Carry on. 🤗🙏

    • X- Tremevidpro
      X- Tremevidpro  2 months ago

      If I went slower, people wouldn't take the time to watch it! 😃

    • X- Tremevidpro
      X- Tremevidpro  2 months ago

      Alot of those so called release sprays are a joke. Coconut oil I've never tried. Thanks forwatching!

    • belilu belilu
      belilu belilu Year ago

      I've been wondering the very same thing. Thanks!

  • Carmen Mueller
    Carmen Mueller Year ago

    HI, very beautiful! Just wondering if you let the layers harden before you go to the next one?

  • mike delia
    mike delia Year ago

    where do you get the metal shavings and crystals from ?

    • Mr.Moon2you
      Mr.Moon2you 3 months ago

      Welders, machine shops , they'd love for you to take a bucket , it's trash all day long to them
      Stop by any warehouse and ask, they're polite just dirty looking lol

  • Sergeyo Orphanos
    Sergeyo Orphanos Year ago +3

    Those are not layered thus they do work the way you describe!

  • Tayshima DABs
    Tayshima DABs Year ago +1

    Hi, 👋🏾😲I'm I made a vlog about how I tested out my orgone trinity shape pyramid form out of mirrors to do a energy ice test it's failing because it broke 2 glass containers that were holding water while freezing and the orgone was in the fridge below it. Each ice test the ice was intact but the glass broke in two. The unknown ice test when I took my orgone outside to charge in the sun still the glass water was freezing without a orgone item underneath in the fridge like before because I took them out for a walk.
    1 more ice test of orgone energy was happening even when I was away with the orgone outside away from the freezer. I come to find it still had energy left in my freezer it froze the glass without breaking, it melting and tasted like Ice, but once I placed the glass of new tap water in the freezer it broke like it imploded and exploited outside it's form without any hesitation and there was no Oregon in the fridge or raider testing for the third trial that was unknown to me at that time I've logged on my channel about it if you want to go view my latest vlog.
    I challenge any orgone creator to explain why I had explosive orgone energy to break the glass ice test when it was just suppose to charge the water, show energy formation, and safety I should be able to use this glass to drink out of again until it broke this morning. So I put the challenge out there watch my vlog to explain my orgone failed or is it a success identifying the energy is there.
    The trouble I'm having is making sure orgone energy is dissipating so I can put whatever I want in my freezer again is my concern🤔✌🏿

  • PAULO CEZAR BARBOZA CEZAR

    WORK VERY BEAUTIFUL , CONGRATULATIONS ! ( RIO DE JANEIRO \ BRASIL - 2017 )

    • X- Tremevidpro
      X- Tremevidpro  Year ago +1

      PAULO CEZAR BARBOZA CEZAR Appreciate the comment! Each and every one. Enjoy the other videos, it's my Hobby and 50 yrs. of Creation! Thanks and be safe!

    • PAULO CEZAR BARBOZA CEZAR
      PAULO CEZAR BARBOZA CEZAR Year ago +2

      I LIKED SO MUCH , SO CONTINUED ! A HUG . ( RIO DE JANEIRO \ BRASIL )

    • X- Tremevidpro
      X- Tremevidpro  Year ago +1

      PAULO CEZAR BARBOZA CEZAR. ManyThanks! Glad you enjoyed the Vid.

  • Eugene Dahl
    Eugene Dahl Year ago

    you sendto me the list of the materials to do it ????

    • X- Tremevidpro
      X- Tremevidpro  Year ago

      Eugene Dahl The list is too long. Can tell you the expense is up there by the time you get all your supplies. Around $500.00!

  • Camila Santos
    Camila Santos Year ago

    Love it! Where can we buy the materials to make our own orgonite? Thank you!

  • Jesse Huckabee
    Jesse Huckabee Year ago +5

    Cool looking paper weights. Good job.

  • 529102
    529102 2 years ago

    lovely work what is your website?

    • X- Tremevidpro
      X- Tremevidpro  Year ago +1

      +529102 Don't have a Website, too busy working.

  • Ty
    Ty 2 years ago +13

    These are amazing. Great work and I would be pleased to buy from you my friend

  • guruuDev
    guruuDev 2 years ago

    I bought a resin orgone pyramid that looks fine till I looked closely then I realized it is fractured through extending from very fine crack lines across the surface right through the body of it. Would such cracks impair the function of it?

    • X- Tremevidpro
      X- Tremevidpro  2 years ago

      +guruuDev That's a good question?
      Contact the seller for Refund.

    • guruuDev
      guruuDev 2 years ago

      +X- Tremevidpro Thanks. Now we need a great answer -- lol. I have asked around a bit and so far one 'no' and one 'yes.'
      As long as it doesn't drastically alter the function, perhaps the answer is somewhere in between.
      I wonder if someone who sees 'auras' would be able to see the orgone energy field emanating from an orgone device or see a person's aura responding to it? Just trying to think of some clear 'immediate' measure of how well your orgone device is working. I guess they have ion meters and such.

    • X- Tremevidpro
      X- Tremevidpro  2 years ago

      +guruuDev ::) thats a great question...

  • Maylene McDondald
    Maylene McDondald 2 years ago

    Absolutely beautiful! Thanks for sharing this!

  • Callie Reynoldz
    Callie Reynoldz 2 years ago +1

    loved your video thanks for sharing your talents. It would have been a 10 if you only had some music with it.

    • X- Tremevidpro
      X- Tremevidpro  2 years ago +1

      +Callie Reynoldz You Tube gives you a choice to choose from. I would love to put some music of my own, but You Tube will shoot down the video. It's happened before. Thanks for watching...

  • Katarina Benko
    Katarina Benko 2 years ago +7

    Thank you.. Your orgnons are amazing.

    • X- Tremevidpro
      X- Tremevidpro  2 years ago +1

      Thank you very much! Glad you enjoyed my video!

  • Carole Mitchell
    Carole Mitchell 2 years ago

    Hello, I have a new metal mould, after destroying my last one with only one use. You say to use Auto Wax, can you tell me which one you suggest please. Also, with new metal mould, how many coats are needed, I have heard so many different claims. Should I use anything else as well as the wax, like release spray after wax is dry? Have had to throw away a few metal moulds, and they are expensive when posted from the US. Many thanks for your help, and your great site!

    • X- Tremevidpro
      X- Tremevidpro  2 years ago

      One fine even cote should do the trick! How did in work out for you?

    • Carole Mitchell
      Carole Mitchell 2 years ago

      Thank you for your reply. I am using Polyester Clear Casting Resin. not Epoxy. As this is a new 6" Metal mould, should I give it a few coats, or will one coat be enough? Do I let the Auto Polish dry before using? I find plastic moulds no problem, it is only the Metal ones that cause the headaches. carol.pacfly@gmail.com Thank you so much for your advice!

    • X- Tremevidpro
      X- Tremevidpro  2 years ago

      I like a Quality Liquid Auto Polish. All you need is a fine film. Place a few drops and smooth out to a smooth surface, but not to much. You must be using Epoxy Two Part...Not Good! Was I correct?

  • Devilisk
    Devilisk 2 years ago

    Whats the song name?

    • X- Tremevidpro
      X- Tremevidpro  2 years ago

      You Tube has a selection to choose from and that sounded fitting.

  • Felipe Photons-com
    Felipe Photons-com 2 years ago

    Love meeting other pyramid buddies! Checkout bitly.com/pyramidland for easy to print PDF cutouts for the Giza, Golden Ratio, Russian and Law of One pyramids. I’ve also posted all the dimension formulas and an online calculator so that you can build them to any size. :)

  • Cher Rod
    Cher Rod 2 years ago

    how much for panther one?

    • X- Tremevidpro
      X- Tremevidpro  2 years ago

      Not For Sale! Sorry! Have Sold on Ebay... Thanks for watching!

  • Monica Pakarati
    Monica Pakarati 2 years ago

    They are beautifull

    • X- Tremevidpro
      X- Tremevidpro  2 years ago

      Thank you and I always appreciate a compliment! Haven't made any in a while. Need to crank it back up again, the expense of it all I guess!

    • X- Tremevidpro
      X- Tremevidpro  2 years ago

      Thank.you very much! Well worth the time and effort! Glad you enjoyed the video!

  • Sun Card 19
    Sun Card 19 2 years ago

    Hey, what brand of resin do you use?

    • X- Tremevidpro
      X- Tremevidpro  2 years ago

      +Elijah Hicks (Sun Card 19)
      Good Luck!

    • Sun Card 19
      Sun Card 19 2 years ago

      +X- Tremevidpro thank you so much!

    • X- Tremevidpro
      X- Tremevidpro  2 years ago

      +Elijah Hicks (Sun Card 19)
      Patience ! STIR SLOWLY with popsicle sticks.I use a long carpet needle and bring them to the top of the surface and start popping them. Works great! Some people will use a straw and glow a cross surface, but that does no good if the BUBBLES are deep!

    • Sun Card 19
      Sun Card 19 2 years ago

      +X- Tremevidpro thank you! How do you avoid bubbles?

    • X- Tremevidpro
      X- Tremevidpro  2 years ago

      Polyester Casting Resin. Lots of practice first highly recommend. You pour in layers and if you forget one time to add ACTIVATOR DROPS, your works could be destroyed. Many of my Orgone Videos will explain that. Open vents. Do not recommend Epoxy as it will YELLOW as time passed. Thanks for watching. Watch out for BUBBLES TOO!

  • Vitali Sverdlov
    Vitali Sverdlov 2 years ago

    Is the direction of the coil matters? I saw on many websites that they put the coil counter clock wise.

    • Vitali Sverdlov
      Vitali Sverdlov 2 years ago

      Thank you so much for your answer. I have never tried to put the coil in the middle the pyramid. I will try to use this technique to build my pyramids.

    • X- Tremevidpro
      X- Tremevidpro  2 years ago +1

      Some say left and some say right. In many of my newest Orgones the Coils are also on Bottom of Pyramids as well. I have sold several and with great feedback from those that use Pocket Orgones with the coil in the middle. So it didn't matter if you are looking inside out or outside in. Your Orgone will still release negative energy regardless. Thanks for watching!

  • Brett Stevens
    Brett Stevens 2 years ago

    what kind of resin do you use?

    • X- Tremevidpro
      X- Tremevidpro  2 years ago

      Clear Polyester Resin. Practice and read all instructions. Thanks for watching. Resin container is shown at very beginning of video!

  • Sylvia Scheibe
    Sylvia Scheibe 2 years ago

    langsamer Bitte.

  • Nikki C
    Nikki C 2 years ago +4

    My orgone pyramid just came UPS and I promise that I felt better once the UPS truck arived. This is God sent

    • X- Tremevidpro
      X- Tremevidpro  2 years ago +2

      They are truly amazing if they are made properly! I can leave the house and feel something is not right. Left my Pocket Orgone at home. Did a U turn! I've had friends come over and the next day they all would call me up and say that there is something up with those Orgones and I would just smile!

  • Simone
    Simone 2 years ago +1

    I was told the center crystal has to be a white quartz crystal. Am I mistaken? Can I use Amethyst or Rose or something else, and if so can you please tell me what. Thanks, I appreciate your help.
    Your work is beautiful :)

    • Mr.Moon2you
      Mr.Moon2you 3 months ago

      +X- Tremevidpro any good websites or ppl of interest ???
      Just starting from scratch , I want to learn more of this art before building any
      Thanks

    • X- Tremevidpro
      X- Tremevidpro  2 years ago +6

      Most all Quartz support Energy. All colors work well, even Titanium Crystals work well when coiled with Copper wire. Do not purchase China Crystals because most all of them are handmade melted quartz, so beware.
      One way to tell a real Crystal Quartz is to squeeze it in your palm and if you feel some heat, keep it! So much to learn about Orgone it's endless and some people will tell you anything, I can only speak from experience. Thanks for watching!

    • X- Tremevidpro
      X- Tremevidpro  2 years ago +3

      Incorrect! Crystals wrapped in copper wire is necessary. Quarts smoky black is very powerful. Combined with Gold will amplify the energy. Must be in layers. Nickle brass shavings are also highly recommended!

  • rasninjacaz
    rasninjacaz 2 years ago

    He didnt even use quartz at the middle. The pyramid is useless

    • Moe Jdg
      Moe Jdg 9 months ago

      You are right this are pretty but are not made properly they are just a decorative paperweights. To make a very strong orgonite you need a 50/50 resin and shavings ratio and and a non visible quartz in the middle.

    • X- Tremevidpro
      X- Tremevidpro  2 years ago +3

      Are you looking in the mirror bro? It's obvious you have no clue! Let the world see your ignorance, because it really shows! Do you understand DELETE? Please leave you ignorance to yourself, you may be contagious!

  • Leilani de Morais
    Leilani de Morais 2 years ago

    muito lindasnamaste

  • keklord
    keklord 2 years ago

    Also, are these meant for decorations?

    • X- Tremevidpro
      X- Tremevidpro  2 years ago

      +keklord
      Look up the video Coral Castle in Florida. One man moved 20 Tons of Coral on the back of a Large Truck all by himself. He never let anyone know how he did it.Not even his wife knew how he did it.Orgonite Energy played a role in the video. Yes, several friends come over and I have approximately 40 Pyramids and many will actually call me the next day and comment there was definately something going on with the Orgone Effects. One explained he had the best night sleep in over 20 years. I gave him one and it stays on his night stand!

    • Richie
      Richie 2 years ago

      +keklord the effects are very real. its even in mainstream science as well.

    • X- Tremevidpro
      X- Tremevidpro  2 years ago +1

      +keklord Discovered in 1880 and Edison and Scientist have studied it's effects. Crystals combined with Quartz and other semi precious stones. I've loaned out several and told that person to keep it for 2 wks. and I want it back. All that I called back did not want to return them. Dreams and peacefulness about them. One sold for $500.00.

    • keklord
      keklord 2 years ago

      +X- Tremevidpro I do really like the look of these things but do you believe in any of the effects is supposedly has.

    • X- Tremevidpro
      X- Tremevidpro  2 years ago

      That and more! Necklace Pendants and Pocket Pals. Thanks for watching!

  • keklord
    keklord 2 years ago

    Did you not know how to loop the music?

    • X- Tremevidpro
      X- Tremevidpro  2 years ago

      +Banjodude Forward
      Wow your weird, don't care to see DEAD BODIES!

    • X- Tremevidpro
      X- Tremevidpro  2 years ago

      No, it simply turned out this way on it's own!

  • duh
    duh 2 years ago

    where did you get the music?

    • X- Tremevidpro
      X- Tremevidpro  2 years ago

      You Tube will give you a choice of 200,000 songs to edit your video. Thanks for watching!

  • Bipolar Network
    Bipolar Network 2 years ago +29

    These are absolutely amazing! I have 4 of them and I don't know what I did without them. JEREMY YOU REALLY SHOULD THINK BEFORE YOU POST. THERE IS NO REASON TO POST ANYTHING NEGATIVE ABOUT SOMEONE DOING SOMETHING THEY ENJOY. That's the problem with society these days. Negativity has taken over sadly. however this guy has found a way to put more positive energy into this world and someone like "JEREMY" comes on and promotes what? negativity. I'm very impresses with the amazing work!!!!!!!!

    • Charles Stan
      Charles Stan 3 months ago

      facebook.com/thedisclosuretimes/photos/a.437688446377452/1536863679793251/?type=3&__xts__%5B0%5D=68.ARAMsz3AIJU_eZHkbhJCFoVizIS0PPrj7auUslbduwKFjmMn-c8eGLJZhXIYwiyM0g4oIWifKvB_LDvsNnvEfsiWx6EObjfyHzQogJXDtXnYmnLpSRdfkEvtLniDLf_KBa_PdsaOI_vQHhQegw84FNMhqkk94dnP6WGp7qgLfTZE8YQKp0-4aRQ&__tn__=EEHH-R

    • X- Tremevidpro
      X- Tremevidpro  3 months ago +1

      +Charles Stan So many people come up with their own ideas. Many won't expland into other avenues. I'm sure Whilhelm Reich would agree! Thanks for watching. I run on positive energy. Have a pleasant day!

    • lkjyuiop
      lkjyuiop 4 months ago

      Stephen Slattery you sound like a narrow minded fool You don’t even know what god is read a witchcraft and I bet you will like what you read

    • Nikolai Woods
      Nikolai Woods Year ago

      bahahaha what?

    • RedRedMane
      RedRedMane Year ago

      Yes, and I am always shocked at how MANY orgone devices sold online have COUNTER-clockwise coils!!!

  • Mariana Laneiro
    Mariana Laneiro 2 years ago

    Adorei

    • X- Tremevidpro
      X- Tremevidpro  2 years ago

      +Mariana Laneiro Thanks for watching! Always something New!

  • X- Tremevidpro
    X- Tremevidpro  2 years ago

    Plain Silicone Sealer Clear. Be sure to purchase the Non Hardning. Thanks for watching!

    • X- Tremevidpro
      X- Tremevidpro  3 months ago

      The tape worked perfectly. If you take a close look, you will see silicone was applied on the inside when I put the tiles together. I used the tape to insure that the Resin would not leak out & it didn't! Thanks for watching.

  • YaYa
    YaYa 2 years ago

    Thanks for the video. Can you tell me what kind of adhesive you used to put the tiles together for the pyramid?

    • Elainemom
      Elainemom Year ago

      Do you need to wrap the copper wire? if so what direction? I am having a hard time finding metals shaving. Also any quartz will do? Help please.

  • Srikandi Warion
    Srikandi Warion 3 years ago

    very nice work, and they are awesome!

    • X- Tremevidpro
      X- Tremevidpro  3 years ago +1

      +Srikandi Warion Thanks for the comment and I do appreciate it! I call it EYE CANDY and each one is so different from the other. After 50 yrs. they should look nice. For 2016 some truly AWSOME Pieces. Including Pocket Pal Orgones and some Outrageous Pyramids as well. Thanks for watching and you have a Safe New Year! End of January next Video!

  • Bürgerin
    Bürgerin 3 years ago

    What a wonderful art work!!!

    • X- Tremevidpro
      X- Tremevidpro  3 years ago

      +Sternenfrau I have enjoyed the Arts for over 50yrs. Think it keeps us young in some strange way. Maybe it's escaping earth for a while!
      Go to EBAY and you can see some sweet work not shown here. My USERNAME is.....fotofinish_123...... Thanks for the comment! I truly appreciate all you good people out their.
      The only to get better at what you do, is to do more of it! The Fine Arts Museum of the South described my works as show Museum Qualities. Patricia B. Wilson.

  • Carole Mitchell
    Carole Mitchell 3 years ago

    Thanks for your reply, could I also ask, is it OK to use ordinary ceramic tiles for the mold, or are you using glass tiles? Thanks again!

    • X- Tremevidpro
      X- Tremevidpro  3 years ago

      I used both, but make sure you rub a fine layer of Auto Wax or your casting will not release from that MOLD. That makes for a bad day! Thanks for watching! Safe Holiday!

  • Carole Mitchell
    Carole Mitchell 3 years ago

    Could you tell me which gauge copper wire to use please. Bought 20 gauge, and too hard to use. Many thanks for an excellent video!

    • X- Tremevidpro
      X- Tremevidpro  3 years ago

      Yes, I also use 20 gauge Copper wire and you most likely picked out Copper coated steel wire and it is too tough to work with. Look for "shaping" wire" grab the end to see if it bends easily.

  • Robert Pivcevic
    Robert Pivcevic 3 years ago

    what about the no1 rule? resin and metal should be in 50:50 ratio...seems you have much more resin than metal in your orgonites....

    • X- Tremevidpro
      X- Tremevidpro  3 years ago

      +Robert Pivcevic No problem! I've made alot of changes over these past couple years. Check out my 4 sided Pyramids? A touch of character!

    • Robert Pivcevic
      Robert Pivcevic 3 years ago

      i am not attacking you....just noticed so you could make it better....you get it all wrong.....i am also making orgonites....

    • X- Tremevidpro
      X- Tremevidpro  3 years ago

      +Robert Pivcevic Those were made years ago. Yes there is more resin you are correct!

    • X- Tremevidpro
      X- Tremevidpro  3 years ago

      I'm not about to get into a long drawn out discussion on rules. You are like others, you stay on the same branch! Fly off the branch and you will soon discover something new! I have several satisfied customers that had some great Relaxation. No more Insomnia and more! You stick to your rules and I will continue mine. I studied over 300 videos and a Rock bound for 30+ yrs. Thanks for watching, hope you learned something!

  • Good Vibe
    Good Vibe 3 years ago +1

    Thank s .

    • Good Vibe
      Good Vibe 3 years ago

      Nice to meet you,i sugest you to chek ,videos of mrs Dolores Cannon, have a happy weekend :))

    • X- Tremevidpro
      X- Tremevidpro  3 years ago

      You are welcome! Have a safe Holiday and thanks for watching... (-:

  • Louie H.
    Louie H. 3 years ago

    Your work is simply beautiful!!!! Love it..

    • X- Tremevidpro
      X- Tremevidpro  3 years ago

      Thanks for the comment! Over 50 yrs. in the Arts and everyday something is cooking in the kitchen. Art is a breath of fresh air for me. An escape from the earth in a way I just couldn't explain. So, an artist creates expression from ones self to another! Some really nice works coming soon! No two look alike!

  • X- Tremevidpro
    X- Tremevidpro  3 years ago

    I also use reversable Coils as well! Thanks for watching!