7075, 7076... Whatever It Takes

Share
Embed
  • Published on Dec 1, 2019
  • Don't know if this was worth the effort, but was in a chatty mood. Come along for the ride as I sort out a few little things on a Factory Scorpa. We'll do bad things, I promise.
  • Science & TechnologyScience & Technology

Comments • 1 762

  • Lyor van Vliet
    Lyor van Vliet 4 hours ago

    Awesome episode, but when are we going to see the Maho? :)

  • Michael Lake
    Michael Lake 13 hours ago

    How to connect? I need help, custom bike shop afraid to help. Need spacers/bushings now so I can let ARP know what bolts i need made.

  • Eric Groslevin
    Eric Groslevin 16 hours ago

    old Tony, I tryed to found a way to contact you outside youtube comments, but like your face is a mistery, conyact you seem to be an AVE parcour.
    to be bref, Can you show me, show us, how you will cut lexan, acrylic, plexiglass ... I thing like anyone, this material is a challenge when come to cut a squarre hole (lets say for mounting a panel voltmeter), anything I used to cut melt the "plastic" on the path of the tool and "re-sealed" it ! awesome useless cut !
    I know, I know, old school Tony drill and hand cut then filed ... but at the time or all is going fast ... handtools are another century, even if I am not so young anymore.
    please, can you make a video about it ?

  • DmakAttack
    DmakAttack 17 hours ago

    Three words for a new project.
    CHINESE
    SHOE
    PATCHER
    trust me, you need to get one and modify it

  • Randy Smith
    Randy Smith 18 hours ago

    This Old Tony+ Please check this out !
    More people need to see these videos of Dan Combs !! PLEASE check them out. I am not putting these on for any financial gain, or anything like that I am listing a video in hopes it draws some attention to this great cop !! Please pass the link along, Thanks ! tvclip.biz/video/3gFimxly9F8/video.html

  • TheDanksmith
    TheDanksmith 19 hours ago

    Congrats on 700K Subs! :D

  • NumerNaBis
    NumerNaBis 20 hours ago

    10 fingers Yeee

  • KaiserYazawa
    KaiserYazawa Day ago

    Your channel is perfect to watch while eating some oatmeal with hot sauce.

  • Winky's Workshop

    I saw the router coming... and it scared me. Where did you get the ultrasonic foot beg cleaner??? Ha

  • AlloutATVing
    AlloutATVing Day ago

    ToT i think we need to see some surface grinder knife sharpening, never saw that done before

  • Lawrence Lentini

    This old Tony: This foot peg is drooping so slightly that only I would notice. Let me fix that...

    Me dailying my running parts bike: I'm missing a footpeg, half the body panels, a starter, the carb for cylinder number 2 and all the tread on the rear tire. Meh, I'll just ride it till it dies cause a new tire is more than I have in the bike...

  • Stuart Anderton
    Stuart Anderton Day ago

    Hey this old tony. Can you do a video on lathing spinning tops, best design, longest spin and can I have the winning top 😁

  • Dave B
    Dave B 2 days ago

    Why not add weld to the frame?

  • Chris Lee
    Chris Lee 2 days ago

    Try this 👍😁 facebook.com/202993593066141/posts/2860248614007279/

  • Aubrey Land
    Aubrey Land 2 days ago

    This Old Tony, how difficult would it be to produce a tap and die set for worm threads, for use on wood?
    That felt like a run on sentence somehow...

  • Matt
    Matt 2 days ago

    I would think a warped rotor is pretty apparent... wouldn't you feel it in the in your hands?

  • David Jonsson
    David Jonsson 2 days ago

    Hello friends!
    I can't find Tonys vidjeo building his hydraulic press, is it gone?
    Please and thanks

  • Mike O'Barr
    Mike O'Barr 2 days ago

    Man I can't believe how fast the channel is growing now! He just posted his 500k vid 10 months ago. I can't think of many channels that put in the effort he does unless they are full-time TVclipr's. I'd say he's definitely earned it. Thanks Tony.

  • Ziggy Davies
    Ziggy Davies 3 days ago

    I presume you considered adding material to the bike frame bracket?

  • Eniklis Nihm
    Eniklis Nihm 3 days ago

    So, add some to the other side?

  • Kreg Lamirand
    Kreg Lamirand 3 days ago

    This Old Odometer is about to turn over 700,000 subs!

  • OutOfNamesToChoose
    OutOfNamesToChoose 3 days ago

    Has anyone said that you sound like Mando, The Mandalorian? Because you sound like Mando, The Mandalorian

  • Ian9toes
    Ian9toes 3 days ago

    I have a similar problem with my KTM front brakes being spongy when the pads get half worn out. I’ve gone to great efforts of bleeding them with no joy. But replacing the pads restores my braking strength.

  • Chase Cdm
    Chase Cdm 4 days ago

    "Even my wife" A+

  • Rock Fish
    Rock Fish 4 days ago

    What?? TF.

  • Stephen McCreery
    Stephen McCreery 4 days ago

    the springs also are probly stretched allowing the sag

  • Owen Digity
    Owen Digity 4 days ago

    Bullshit, never trust a guy with soft hands. Your channel is blocked.

  • Happy Fox
    Happy Fox 4 days ago

    ah, click bait

  • Al Eldon
    Al Eldon 4 days ago

    OMG his hands talking. Very scary. He can even stop clapping sound with hands. How do you do it?
    He is alchemist and knows magic. I will not subscribe to such scary hands
    Thx for video!

  • Kinzie Burton
    Kinzie Burton 4 days ago

    Invest in a table router, even still that’s a good way to lose a finger or two.

  • Sean_Patriot America

    Love it!

  • Craig Hastie
    Craig Hastie 4 days ago

    Simple question, why didn't you just add some weld to the frame side and file it back? Just curious as there may be something obvious I'm missing.

    • Craig Hastie
      Craig Hastie 4 days ago

      @This Old Tony thanks! 😁

    • This Old Tony
      This Old Tony  4 days ago +1

      that would work! but it's a permanent modification to the bike.

  • deepin Uranus
    deepin Uranus 4 days ago

    Not another scorpa Tony..........

  • MaxSantos
    MaxSantos 4 days ago

    Why not add the bid to the support?

  • ChrisHallett83
    ChrisHallett83 4 days ago +2

    "No other pegging, except foot, is allowed" - hey now c'mon, no kink-shaming here! We're all gentlemen, there's no reason to exclude someone just because he occasionally likes for his partner to take the reins, as it were... Do you what you like with a person what consents, gents! The world's too small and life's too short to feel bad about what makes you feel good.

  • Gary Skowbo
    Gary Skowbo 4 days ago

    Shooting from the hip is usually the best and most accurate way of achieving the results you want.😁

  • Jon Gandy
    Jon Gandy 5 days ago

    You, sir, are a comedic genius. I love your machining, how you story tell though (and I mean every aspect) is priceless.

  • Robby Hieser
    Robby Hieser 5 days ago

    Dude sometimes I can't even with you...lmao!!

  • Ambrose Kalasky
    Ambrose Kalasky 5 days ago

    Whoa, I didn't know you did dirt bike things. Just sub'ed. Not because of dirt bikes, but ......it helped. You're hired.

  • Roone Briley
    Roone Briley 5 days ago

    Grow your damn fingernail out. Jesus.

  • T Smith
    T Smith 5 days ago

    What I learned

  • Joseph Case
    Joseph Case 5 days ago

    Anther consequence of welding the 7075 Tony is the it will usually drop a few T levels

  • freshpootube
    freshpootube 5 days ago

    Oh for pete's sake. Glue a stop onto them.

  • Jamie Beilensohn
    Jamie Beilensohn 5 days ago

    Owned the older scorpa with Yamaha 250 engine. Never let me down. And like you , never owned a new bike.

  • ShepardIRL
    ShepardIRL 5 days ago

    this video was surprisingly packed full of new info for me.

  • James Mooney
    James Mooney 5 days ago

    Weld the extra material on the frame dumbass

  • racebends
    racebends 5 days ago

    What formula do you use for heat in a project while cutting metal down to hold a close tolerance?

  • Funny/Gaming 1
    Funny/Gaming 1 5 days ago

    Maybe helpful!
    I onced had a similar experience with a Renault Clio Sports car, I had just changed the pads but the owner complained that the brakes were spongy. Turns out that the pads I was given were the wrong type, so as soon as I changed the pads the problem was solved.

  • BDP Racing
    BDP Racing 5 days ago +1

    Somewhere there is a crusty old machinist with an eye patch and 4 fingers watching your videos then talking shit about how you aren’t a real machinist since you still have all 10 digits.

  • SHRED CT
    SHRED CT 5 days ago

    Scorpa🤘🔥 Tony I have a new found respect for you.😂 We're more alike than I ever knew!!

  • SleepnGrunt
    SleepnGrunt 5 days ago

    Hey guy, you fuck right off with that "UltraSonic Foot Peg Cleaner".......Subbed

  • Gorden D
    Gorden D 5 days ago

    you can test 7075 series of aluminum with calcium chloride solution, if it turns black or dark grey it's 7075. And for your extra bonus points if it's Magnesium use white vinegar and will also turn grey black bubbling. yes you can tig weld magnesium with the right filler and lots of argon.

  • Dat L24
    Dat L24 5 days ago

    "as you can see from the wear on the bolt hole, this'll probably get replaced sooner rather than later"
    Why not just make and press a delrin or brass bushing in? We do it all the time for old SU carburetors with steel throttle shafts. Years more service is left in those things

  • JohnIn WayneNewJersey

    I just have to say here that the production value of your videos is quite impressive. So what were you in your former life, machine operator of film producer? You are definitely quite adept at both.

  • ShamblerDK
    ShamblerDK 5 days ago

    The first few seconds scared me quite a bit :-(

  • scoper49
    scoper49 5 days ago

    I literally flinched at the beginning when the part kicked back. Panic mode engaged.

  • jim ewok
    jim ewok 5 days ago

    why would we design an aesthetic hole in something that is expressly a "guard" against ingress?

  • ANDYMCNET
    ANDYMCNET 5 days ago

    Ok ok I just went back to the old video to say i told you so in the comments lol because 30% of the time I am right every time. Xx

  • Janos Ballo
    Janos Ballo 5 days ago

    Man , that sense of humor ... love your videos :)

  • James T
    James T 5 days ago

    Just lol.