How to Replace Hood Release Cable 05-10 Chrysler 300

Share
Embed
  • Published on Jan 26, 2017
  • Buy Now!
    New Hood Release Cable from 1AAuto.com www.1aauto.com/*/i/1AHRC00052?TVclip&OZ6z6xDwNk
    In this video, 1A Auto shows how to replace the hood release cable on a Chrysler 300.
    🔧 List of tools used:
    • Flat Blade Screwdriver 1aau.to/tWY/1AXAA00013
    • 10mm Socket 1aau.to/ttM/1AXAA00017
    • 8mm Socket 1aau.to/ttM/1AXAA00017
    • Trim Tool Set 1aau.to/tcN/1AXXX00004
    • Ratchet 1aau.to/tw8/1AXAA00016
    • Socket Extensions 1aau.to/tBR/1AXAA00015
    For More Info visit us at 1aau.to/h/6F/
    ⚠ DISCLAIMER:
    While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
  • Autos & VehiclesAutos & Vehicles

Comments • 11

  • Bryan Rudy
    Bryan Rudy 3 months ago

    What if you can't open the hood!?

    • Xadus 23
      Xadus 23 3 months ago

      Have someone press down firmly just above the latch, and someone inside to pull the cable. (If cable hasn't already broken from hood latch)

  • Perce Mendez
    Perce Mendez 5 months ago

    Thank you guys

  • TFSFireman
    TFSFireman 9 months ago

    EXCELLENT video, thank you.
    My '07 Magnum has a seized hood release cable. I have removed the headlites before, so this should be an easy repair.

    • 1A Auto Parts
      1A Auto Parts  9 months ago

      Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com +TFSFireman

  • Justin Bolton
    Justin Bolton Year ago +2

    I have an 08 charger r/t. I simply disconnected the cord from the latch and connected it to about 8’ of welding wire. From there, I pulled the cord off the 3 locating clips. Then inside the car, I removed the handle as shown and pulled the entire cord through the firewall. Disconnect the old cord and put the new one on the wire that was also pulled through. Then pull from the engine side to have the new cable follow the path of the old one.
    This avoids having to remove the bumper, wheel well, and wheel.
    Good luck.

  • 2012htcme
    2012htcme Year ago

    Thanks for this guy's !!

    • 1A Auto Parts
      1A Auto Parts  Year ago

      +2012htcme Thanks for checking us out. Shop here for high quality auto parts: tiny.cc/Shop1aauto

  • Reggie Lamay
    Reggie Lamay 2 years ago

    Will this hood cable fit on chrysler 300 2.7 base model ?
    Thanx

    • 1A Auto Parts
      1A Auto Parts  2 years ago

      +Reggie Lamay Thanks for watching! This cable will fit any 2005-2010 Chrysler 300, here is a link to it on our site: www.1aauto.com/hood-release-cable-with-handle/i/1ahrc00052?TVclip&CTA+Comment&OZ6z6xDwNk